Ø      Prepare purchase requisitions for computer hardware and software, networking and telecommunications equipment, test equipment, cabling, or tools.

Ø      Review and evaluate requests from engineers, managers, and technicians for system modifications.

Ø      Test and evaluate hardware and software to determine efficiency, reliability, or compatibility with existing systems.

Ø      Develop, maintain, or implement telecommunications disaster recovery plans to ensure business continuity.

2009 – 2011

JABEL OIL SERVICES

Tripoli, Libya

Position: Telecom Engineer

Duties and Responsibilities:

Ø                                                                                                               Supervises and evaluates the voice mail system coordinator and intercom equipment installation;

Ø                                                                                                               Monitors and provides regulatory coordination of cable CCTV telecommunications packages and

Franchises, reviews and coordinates requests for cable television rate adjustments.

Ø                                                                                                               Coordinates telecommunications and cable television franchises initial and renewal as necessary effectively supervises handling of citizen complaints regarding cable services; displays knowledge of regulatory

requirements and procedures for telecommunications/cable television activities under the project responsibility.

Ø                                                                                                               Survey satellite received all sites for proper signal level and provides technical assistance in dish location

and installation, transporting dishes as necessary.

Ø                                                                                                               Supervises maintenance of the Equipments voice mail system, including planning for system enhancements

and insuring that information on the voice mail system is current and appropriate.

Ø                                                                                                               Supervises the City’s Internet Home Page assuring that information is available suitable and current as

requested,

Ø                                                                                                               Coordinates preparation of presentations and produces written/graphic support materials for the site

council and project Manager’s Office. Supports departments through the implementation of various

computer graphics uses, such as overhead transparencies, 35mm slides, and hard-copy.

Ø                                                                                                               Effectively coordinates and organizes multiple projects to meet specific deadlines. Proposes long-term

goals, objectives, and procedures for subject areas.

Ø                                                                                                               Operates personal computers proficiently. Sees clearly and distinguishes colors. Shows initiative in job

duties, and works effectively without close supervision. 

Ø                                                                                                               Coordinating the construction work on site, and checking status reports and progress which have been

prepared by the contractors. Inspecting the finished work report  and advising the construction of any

instrument equipments related problems, and of possible techniques for resolving the problem.

Ø                                                                                                               Participate in and carry out installation, repair, modification, optimization, or acceptance test procedures

of wireless infrastructures and electrical equipment

Ø                                                                                                               Must be able to work at heights up to 500’; with abilities to become efficient with weather proofing,

grounding, and rigging

Ø                                                                                                               Maintain clean, orderly environment adhering to company policies and industry regulation/standard(s)

(OSHA)

Ø                                                                                                               Must have knowledge of basic hand tools and willingness to gain experience with power tools

Ø                                                                                                               Be available for evening, weekends, and rotational assignments; accepting on-call responsibilities

2006 – 2009

G-TECH CO.LTD

Riyadh, K.S.A

Position: Telecommunication Engineer

Duties and Responsibilities:

Ø      Committed installation and maintenance of  PABX., Nortel Network Central CS1000 Option 81,

      MG1000E series, and small Systems BCM 800 to 500 include upgrading in all Meridian Systems

              to all diplomatic country of Saudi Embassy in around the world.

Ø      Engage Voice and Data Programming capabilities in all peripherals Equipments through Nortel Networks

      Systems

Ø      Documents network by labeling and routing equipment and cables; recording configuration diagrams and specifications.

Ø      Applied Configuration of CISCO routers, switches, firewalls, and other CISCO synchronization

implemented like VLAN, VoIP, NAT, VPN, and Dial on Demand Routing, efferent routing protocols, QS,

IP Security and other TCP/IP standards.

Ø      Supervise the Software Up gradation from MS access to SQL server to added more employees to

      current system

Ø      Supervisory Pulling and Installation of Fiber Cable Termination from end to end point server in all

various area

Ø      Establishes voice and data networks by running, pulling, terminating, and splicing cables; installing

telecommunications equipment, routers, switches, multiplexors, cable trays, and alarm and fire-

suppression systems; building ironwork and ladder racks; establishing connections; programming

features; establishing connections and integrations; following industry standards; activating remote access

tools; coordinating with contractors.

Ø      Verifies service by testing circuits, equipment, and alarms; identifying, correcting, or escalating

problems and support maintenance and miscellaneous works for the in house warranty.

Ø      Maintains network by troubleshooting and repairing outages; testing network back-up procedures;

updating documentation.

Ø      Maintains safe work environment by following codes, standards, and legal regulations.

Ø      Keeps supplies ready by inventorying stock; placing orders; verifying receipt.

Ø      Enhances department and organization reputation by accepting ownership for accomplishing new

and different requests; exploring opportunities to add value to job accomplishments.

Ø      Installation, testing and commissioning of the operational systems

Ø      (FTTH) Fiber to the home is a fiber optic communication delivery form where the fiber extends from

      a central office to the boundary of a home living space or business office. Once it reaches the home

      or business office, the signal is conveyed throughout the space using coaxial cable, wireless, optical

      fibers or power line communication.

Ø      The main benefit of fiber to the home is providing faster connection speeds and higher carrying capacity

than twisted pair conductors, coaxial cable, or digital subscriber line (DSL).

2003 – 2006

SIEMENS AG Branch Libya

Tripoli, Libya

Position: Telecommunication Supervisor

Duties and Responsibilities:

Ø      Supervised in structural committed at a field works operation in PCCS and TBBS North and East

Jabal Hassuna Project.

Ø      Involved installation at GSM Cell Sites for Tower Repeater assembling Meliax and Fiber Optic cables

installation and termination with an input range of +6 dBM to -50 dBm and is calibrated at 850, 1300, 1310,

1490, 1550 and 1625 nm. Hz tones.

Ø      To supervise all direct employees, contractors and sub-contractors to ensure that safe methods or

working is in place.

Ø      Ensure that the installation staffs are working according to instructions given for how to handle and

install the equipment.

Ø      Manage and supervise the installation work onsite in accordance to Siemens procedures with respect

to customer’s directives.

Ø      Coordinate with the project manager to check that tools, materials documentations for construction

delivered is in correct quantities and at the right time.

Ø      Coordinate with project manager to check that the working environment maintained at an acceptable

level, carry put safety inspection and ensure that mains electrical tools, etc. are in good condition.

Ø      Committed fiber Optic Cable(FOC)Jointing works with equipment assisting such as fusion machine (FM),

Optical Time Domain Reflect ohmmeter (OTDR) and Power Meter Machine (PMM)

Ø      Inspect Installation setting of the Telemetry Instrument Equipment (TIE),Spectrum Analyzer (SA),

Microwave Frequency Counter(MFC),Reducer Connector(RC),Transmission Internet (Fiver UTP and

Accessories)

2001 – 2003

BROWN AND ROOT North Africa (Dong ah Consultant)

Bengasher, Libya

Position: Telecom Engineer

Duties and Responsibilities

Ø      Repair, install or maintain mobile or stationary radio transmitting, broadcasting, and receiving equipment,

and two-way radio communications systems used in cellular telecommunications, mobile broadband, ship-

to-shore, aircraft-to-ground communications, and radio equipment in service and emergency vehicles. May

test and analyze network coverage.

Ø      Receive acknowledgment report from the various sites in the desert if where the operation status is

being monitored

Ø      Gathering information for implementing the new project

Ø      Cooperating with the co-radio operator  for recording the status report and submitted to the

       responsible engineers.

Ø      Manual follow up with the clients internal team to get an expected schedule for all pending documents

Ø      Update and submit daily accomplishment reports from the other sites and submitted to the planning

              and scheduling department.

Ø      Monitoring of all reports from sub contractors as well as received any orders or demand

Ø      Recording incoming fax messages, telexes and letter and distribute the said documents to the

concerned personnel

Ø      Maintain a library of document such as manuals, procedures, specifications, drawing work plans,

telexes, fax vendors data, etc.

Ø      Carry out emergency reporting accident and provides transportation and medication equipments as

Necessary

Ø      Collecting inputs from clients and Listing out the Documents and documenting the project details

Ø      Explaining the Project Plan to internal execution team

Ø      Tracking the pending documents through weekly progress reports.

Ø      Notifying the involved party for tacking appropriate action on the pending documents

Ø      Export of As-Built files in the customer required format

Ø      Sign-off from the customers with clear specifications of retention of Archives

1998 – 2001

ZUETINA OIL COMPANY

Tripoli, Libya

Position: Telecommunication Foreman

Duties and Responsibilities:

Ø      Maintenance operational commitments of the ERICSSON MD 110 and carry out inspection and

      Commissioning the central equipments such as PANASONIC KXTD 500 and SIEMENS

SDH (Synchronous Digital Hierarchy) standard technology for data transmission on optical media. It is

the international equivalent of Synchronous Optical Network (SON)

Ø      Assist with the technical training and provide technical guidance to new operating maintenance staff.

Ø      Provide engineering support to issue the reliable operation and maintenance of the equipment including

      the control system and programming ability in the control.

Ø      Investigates equipments problems and carry out modifications to the instrumentation controls or other

      electrical equipment required

Ø      Arrange Manpower and materials for major equipment troubles. Inspect and supervise the work done

              by manpower.

Ø      Carry out emergency troubleshooting as required and recommend modifications to ELV Equipment if

necessary.

Ø      Provides engineering support operation and maintenance activities and operating control equipment

plant and including all mini PABX system operated by the company.

Ø      Plans and set up preventives maintenance programs.

Ø      Inspector switching at routing system and ground works operations such as install rectifies,

distribution panels backup batteries, Switching wiring installation etc.

1996 – 1998

COGIFAR IMPRESSIT

Sirte, Libya

Position: Telecom Engineer

Duties and Responsibilities:

Ø      Read understand and interpret Electrical drawings lighting, power, smoke heat detector, voice data, CCTV, CATV, burglar alarm, TV & musical systems

Ø               Responsible for low voltage site services, lead the design team and prepare drawings  and specification for

distribution at 11 KV and 415 UPS unit and auxiliary DC supplies

Ø               Carry out wiring termination works such as rectifier equipments installation in every substation for

telecommunication distribution.

Ø               Supervisory installation of  security equipments such as Fire Alarms Detector (FAD),Infrared, HF, VHF,

UHF, SSB, Microwave Communication and Public Address System, setting entire auditorium and

commissioning

Ø               Conduct wiring termination on instrumentation cable interconnecting local and remote Instruments,

associated Equipment, and technical installation advisory.

Ø               Supervisory checking and all location and updated files documents such as installation status of all

completion works etc.

Ø               Assigning duties on laying of cables, construction of cable trays, electrical wiring etc to workers and scheduling day-to-day activities on site.

Ø               Liaising with consultant to modify design based on site construction work and producing as built drawing

to that effect.

Ø                Report writing on daily, weekly and monthly activities on site.

Ø               Briefing workers on safety rules & making sure they adhere to it while working onsite.

Ø               Finding creative solutions to the challenges of network design, mobile communications, data service requirements and internet and network signaling protocols

Ø               All Phases of Tower construction, modification, and repair & maintenance.

Ø               Assist trouble shooting AT&T UMTS and LTE Installation.

Ø               Identify all materials and other resources needed to complete project.

Ø               Complete quality work in a timely and efficient manner.

Ø               Erection of various tower types, including self-support and monopoles.

Ø               Installation and alignment of various types of antennas.

Ø               Assist installing guy wires, grounding, and cad welding.

Ø               Setting shelters and installation of ice bridge and testing theoretical designs.

Ø               Coaxial cable terminations and weather proofing.

Ø               Attending conferences and seminars to network and keep up to date with the latest developments in the

sector;

1994 – 1996

DONG AH CONSORTIUM

NEJH, Libya

Position: SCADA Operator

Duties and Responsibilities:                                                               

Ø      Control and monitor the safety environment of the mine workings, reporting to various individuals in the senior management structure.

Ø      Involved periodically electronically pass on accurate shift work progress throughout the day.

Ø      Receive and forward both internal and external telephone messages. 

Ø      Key responsibilities and accountabilities: 

Ø      Operate the mine switchboard and accurately receive and convey telephone correspondence. 

Ø      Monitor and manage the mine environment via the SCADA computer operating software, relaying

relevant information to key personnel. 

Ø      Stop, start and effectively control mine equipment, such as conveyor belts, pumps and auxiliary fans,

using the SCADA operating software.

Ø      Respond to and act upon an emergency incident invoking the Emergency Plan if necessary.

Ø      Monitor and report on work activities providing relevant management with regular information updates

Ø      via e-mail and Attend training sessions to develop relevant knowledge and skills.

Ø      Involved in various simultaneous communication at all well field cable system in PCCS and TBBS at

North and East Jabal Hassuna project.

Ø      Miscellaneous works on process control system (PCS) with battery charger installation equipment with

internal and external wiring terminate which includes 44mhz loading coil (LC) per 1 km, in terminals,

board PCS wiring termination to MDF in all various Telephone outlet including paging system equipment,

installed loud speaker and all common telecommunications and instrumentation equipment are committed.

Ø      Committed work for PCCS well field cable system (WCS) which including telephone cable laying, cable

mole flow at 10 to 20 pairs in order, instrumentation cable laying, piping concrete and backfill for haul                                              road and access road crossing cable, was jointing including Installation at 88 mhz. loading

              coil per 1 km. Fiber Optic Cable laying, marking Post installation, wellhead trench and cabling work,

              cabling glancing, splicing, wiring Preparation closure meager and equipment acceptance test

Ø      Communicate locations of personnel, equipment, outage information and safety measures with internal and

      field personnel.

Ø      Communicate member requests with appropriate internal and field personnel.

Ø      Perform SCADA/AMI operations as required by line personnel.

Ø      Administer SCADA and AMI programming and data collection functions.

Ø      Utilize the SCADA and AMI systems to monitor system statistics in conjunction with Systems

Operation Center functions.

Ø      Responsible for being available for scheduled rotational (on-call) duties and as needed.

Ø      Responsible for following all cooperative safety policies and procedures.

Ø      Inspects monitors and adjusts plant and lift station processes, equipment, flows and alarms, using

SCADA software.

1991 – 1994             

IMI Co. Ltd.

Oil, Gas Project & Maintenance

CHAD CAMEROUN North Africa

Position: Telecom & Instrumentation Supervisor

Duties and Responsibilities:

Ø      Covered duties including Inspection, supervision for testing, calibration, installation of field instrument such

as Pressure, Flow, Level and Temperature Transmitter Switches, Indicator to each required setting and range based in the Specification Sheet or Data sheet and installation hook up drawings.

Ø      Installation inspection of impulse tubing’s, cables, enclosures, and all related fixings, conduits, labels, brackets, frames, terminations, etc. which have been made by contractors.

Ø      Following the construction work on site, and checking status reports and progress reports which have been prepared by the contractors. Inspecting the finished work and advising the construction supervisor of any instrument related problems, and of possible techniques for resolving the problems.

Ø      Testing and calibration of instrument equipment and procedures.

Ø      Review scope of works, includes contractor supplied materials & work by others in accordance to

company engineering standards & specifications.

Ø      Perform inspections on metering and continuity testing of instrument cables before & after installation.

Ø      Prepare RFI (Request for Inspection) submitted to client’s project inspection unit.

Ø      Visual inspection of instruments and materials to be installed and recorded those which are defective and locking.

Ø      Installation Inspection of System wiring of Programmable Logic Control (PLC), Distribution Control

System (DCS) and ESD System Panel (ESD).

Ø      Coordination for Site Acceptance Test (SAT) of ABB Advent 460 DCS, ABB August PLC, Honeywell,

Ø      Foxboro, Yocogawa System, and Bentley Nevada 3500 vibration systems.

Ø      Assisting engineers and vendors in calibrating and checking the input / output module cards, electronic

alarm signaling unit (TES 20) for temperature and standard signals.

Ø      Process Electronic Controller (Proteomics 500/550), pneumatic controller and isolating IS Interface Units

(MT 4000 Series).

Ø      Witnessing of Loop testing and calibration of all instruments in field to each required setting and range

based on the Instrument Data Sheets. Calibration of Control Valve and checking if it is in working

condition and performing also valve stroking during loop checking on site to control room.

Ø      Participating commissioning group during the nearly completion of the project, works such as: System

testing, Instrument Installation, Instrument Tagging, final Loop checking during start-up of each units and Coordinate completion walk-downs.

Ø      Ability to read the piping and instrument Diagram (P&ID), Instrument Loop Diagram, Instrument Data

Sheet and Logic and Control Circuit Diagrams, Etc.

Ø      Redlining of all instrumentation drawing such as: P&ID, Instrument loop drawing, Logic drawing, DCS

and ESD Wiring and Interconnection diagram and having knowledge in Computer.

Ø         Participating commissioning group during the nearly completion of the project.

INSTRUMENT HANDLED:

Foxboro AI Series, Valtek Instrument, General Monitors, Fisher, Masoneilan, Barton

Instrument, Magnetron, Rotorque, Limitorque and US Gauges, Foxboro (Aspect 200

System), Rosemount, Novo Pig none, Bentley Nevada, Honeywell System, ABB Kent

Taylor, Hartman & Braun, Delta Control and Hart Communicator 375/275.

Computer Literacy Microsoft Access, Excel, Microsoft Word, Windows 2000/MS Office

2000/Lotus Notes

1986 – 1990

PHILIPPINES LONG DISTANCE TELEPHONE COMPANY (PLDT)

Mariveles, Epza Bataan

Position: PABX Technician

Duties and Responsibilities:

Ø      Daily routine the performance of all equipments inside telephone exchange through the aid of computer

     programming.

Ø      Perform regular preventives and corrective maintenance and provide immediate restoration and

       rehabilitation of telephone subscriber lines my area at responsibility

Ø      Conduct survey and inspection of facilities for possible subscriber lines installation

Ø      Conduct activities such as new installation, outside more (CT/F)wiring termination at the cabinet cross

      Connection

Ø      Consolidated report to proper authorities trouble reported such as Major Cable Trouble (MCT) Individual

      Cable Trouble (ICT) Central Office Trouble (COT) and conduct troubles

Ø      Received correspondence report from various subscribers and conducts repair works and an O.S.

      Technician task and checks troubleshoots defective equipment inside exchange.

Ø      Software and hardware administration.

Ø      Maintenance of PABX equipment as well as its entire lines via programming operation.

Ø      Conduct preventive maintenance

CHARACTER REFERENCE

Available upon request

UNDERTAKING

I HEREBY CERTIFY THAT ALL ABOVE INFORMATION AND DATAILS HAVE GIVEN ARE TRUE

AND HONEST TO THE BEST OF MY KNOWLEDGE IN ADDITION, ABILITY.

      ______________                                                                                                                 _____________

            SIGNATURE                    DATE